office@poligas.com.ua

Mykulynetska str., 31

Ternopil

46005, Ukraine

  • Українська
  • Русский
  • English

+38 (0352) 52-81-69 tel./fax

+38 (067) 483-38-33 office

Ukrainian Manufacturer of Polymer Pipes and Electrofusion Fittings

Group of companies «TERPOLIMERGAS»

Company "ТерПолімерГаз"

Manufacturer of thermistor and butt connecting parts for water and gas supply

Products

01 Electrofusion Coupler

Polyethylene PE 100 SDR – 11
6 bar Gas/ 10 bar water
4 mm pin connectors
Indicator welding
280 -630 mm SDR 17 couplers are available

02 Electrofusion Reducer

Polyethylene PE 100 SDR – 11
10 bar Gas/ 16 bar Water
4 mm pin connectors
Indicator welding

03 Electrofusion Elbow 90°

Polyethylene PE 100 SDR – 11
10 bar Gas/ 16 bar Water
4 mm pin connectors
Indicator welding

04 Electrofusion End Cap

Polyethylene PE 100 SDR – 11
10 bar Gas/ 16 bar Water
4 mm pin connectors
Indicator welding

05 Tapping Tee

Polyethylene PE 100 SDR – 11
10 bar Gas/ 16 bar Water
With integrated cutter Pressure Tapping
Long vent for welding
End Cap with gasket ring
Is used with Branch Saddle

06 Electrofusion Saddle

Polyethylene PE 100 SDR – 11
10 bar Gas/ 16 bar Water
May be used with Spigot Reducer
Monoblock bottom part
4 mm pin connectors
Limited path fusion indicators

07 Electrofusion Tapping Saddle Tee

Polyethylene PE 100 SDR – 11
10 bar Gas/ 16 bar Water
With integrated cutter Pressure Tapping
Long vent for welding
End Cap with gasket ring
Is used with Branch Saddle

08 Electrofusion Tee

Polyethylene PE 100 SDR – 11
10 bar Gas/ 16 bar Water
4 mm pin connectors
Indicator welding

09 Electrofusion Reducer Tee

Polyethylene PE 100 SDR – 11
10 bar Gas/ 16 bar Water
4 mm pin connectors
Indicator welding

10 Electrofusion Coupling PE-RT

Resistant polyethylene PE-RT – Type 2 marks Dowlex 2388
10 bar Water
Maximum temperature 95°C
4 mm pin connectors
Indicator welding

11 Electrofusion Reducer PE-RT

Resistant polyethylene PE-RT – Type 2 marks Dowlex 2388
10 bar Water
Maximum temperature 95°C
4 mm pin connectors
Indicator welding

12 Electrofusion Tee PE-RT

Resistant polyethylene PE-RT – Type 2 marks Dowlex 2388
10 bar Water
Maximum temperature 95°C
4 mm pin connectors
Indicator welding

13 Transition PE / Steel

Polyethylene PE 100 SDR – 11
10 bar Gas/ 16 bar Water
Suitable for electric welding
Steel pipe without plastic casing complies

14 Transition Coupler PE / Steel

Polyethylene PE 100 SDR – 11
10 bar Gas/ 16 bar Water
4 mm pin connectors
Indicator welding
Suitable for electric welding
Steel pipe without plastic casing complies

15 Electrofusion Coupling PE / Steel

Polyethylene PE 100 SDR – 11
10 bar Gas/ 16 bar Water
4 mm pin connectors
Indicator welding
Suitable for electric welding
Steel pipe without plastic casing complies

16 Transition PE / Steel with a plastic tube

Yard or ground gas inlet
Used to supply gas from the main pipeline to the building for binding gas cabinets
The introduction of a domestic gas used in the construction of underground systems to deliver combustible gas from the central highway to individual consumers, pressure up to 0.6 MPa
The diameter of the basement entries: 25/20, 32/25, 40/32. Designed in the shape of an arc
The kit includes:
1. The ball valve is connected through a union nut or a thread
2. Aluminum Case 2 m
3. Transition PE / steel with a long polyethylene pipe 3.5 m
4. Plug with collar
5. The clutch PTC thermistor is equal to the diameter of the PE pipe

17 Spigot Flange Adaptor Short

Polyethylene PE 100 SDR – 11, SDR – 17
10 bar Gas/ 16 bar Water
Ability to increase by welding butt

18 Spigot Flange Adaptor Long

Polyethylene PE 100 SDR – 11, SDR – 17
10 bar Gas/ 16 bar Water
Сast

19 Spigot Elbow 90°

Polyethylene PE 100 SDR – 11, SDR – 17
10 bar Gas/ 16 bar Water

20 Spigot Reducer

Polyethylene PE 100 SDR – 11
10 bar Gas/ 16 bar Water
Ability to increase by welding butt

21 Spigot Reducer

Polyethylene PE 100 SDR – 11, SDR – 17
10 bar Gas/ 16 bar Water
Ability to increase by welding butt

22 Spigot Tee

Polyethylene PE 100 SDR – 11, SDR – 17
10 bar Gas/ 16 bar Water

23 Reducer Tee

Polyethylene PE 100 SDR – 11, SDR – 17
10 bar Gas/ 16 bar Water

24 FLANGE SPIGOT ADAPTOR

Flange carved (flange spigot adaptor) are used for the assembling of polyethylene pipes and joining the armature to them.

Assembling of plastic pipe flanges are manufactured using the sleeve (flange spigot adaptor) which is welded to the end of the pipe and is contracted by disposable flanges, also this type of connection allows to connect to the pipe the locking tube and other types of armature.

Flanges which is fitted to the sleeve are made according to the drawing and sizes of GOST 12820 80, EN 1092 1. The only one difference – the inner diameter of the flange is longer than in the specified standards, which allows you to connect the flanges according to GOST and EN with bored flanges and attached to them armature.

25 END CAP SPIGOT

Polyethylene PE 100 SDR 11

Pressure 10 bar Gas / 16 bar Water

Connecting welding machine WELTECH

Apparatus for welding of polymer pipes. Welding range from d = 40 to d = 1600 mm. (depending on the model). The welder can be used on objects that are being built in cold and moderate climatic conditions at temperatures not below 15 ° C.

Meets the requirements of safety of electrical equipment 12.2.007.0 – 75.

Varieties:
– with a manual hydraulic unit;
– hydraulic unit with control unit;
– High degree of automation.

Includes:

– centralizer (1 pc);

– header (1 pc);

– heater (1 pc);

– case (1 pc);

– removable liners;

– tool box (1 pc);

– Hexagon bolt for removable liners;

– hexagon (1 pc);

– a wrench (1 piece);

– working jacket (1 piece).

Warranty period of the welder is 12 months.

GAS PIPES FROM POLYETHYLENE PE-80, PE-100

The pipes used for the combustible gases with working pressure up to 10,0 bar, which is used for the building and repairing the gas supply.

The warranty period of pipes exploitation is 50 years if all rules of assembling were used.

They are manufactured in black colour with yellow lengthwise lines.

Plumbing pressure pipes from polyethylen PE-100

The pipes used for building extranets (plumbings, artesian wells, reclamation systems, gravity and pressure sewers).

The warranty period of pipes exploitation is 50 years if all rules of assembling were used.

They are manufactured in black colour with blue lengthwise lines.

Polyethylene

The company produces cast and TerPolimerGaz Thermistor fittings, low-pressure polyethylene

The company also sells the pellets of polyethylene (HDPE) grade PE 100 and PE-80 production companies:

«Sabic» Germany, «Sabic» AEO, «PEBO» Italy, «Borealis» UAE, «Unipetrol» Czech Republic.

Stamps PE-100 and PE-80 pipe is polyethylene, which is intended for the production of polyethylene pipes for water and gas supply pressure.

According to its characteristics polyethylene PE 100 and PE-80 has a high resistance to rapid crack propagation and long-term stress. PE given mark turns black at the factory.

Each batch of this brand of polyethylene (HDPE) laboratory tests.

Polyethylene all manufacturers effectively used for production TerPolimerGaz for over 7 years.

In order to buy low-pressure polyethylene, as well as obtain all the necessary information, please contact a specialist.

Thermistor Welding Machine “OPTIMA-231”

The welding machine has the ability to weld pipes and fittings manufactured on the basis of PE and PP in a range of diameters from 20 to 315 mm and more, for which the welding power does not exceed 2200 W (2.2 kW) at 39.5 volts set resistor is not fitting below 0.7 ohms various manufacturers.

Operating temperature range from -10C to + 45C.

Assessment of quality of interface with the ability to print the protocol of welded joints

Management of welding machine is carried out using a membrane keypad on the main panel of the unit, line display in the Ukrainian language.

Equipped with a scanner to read the bar code handheld and emergency input welding code.

Data transfer (protocol) via USB to your computer.

Metal transport box supplied.

The device is equipped with:

  • Disk Utility and copy instructions
  • two pairs of lugs 4 mm. and 4.6 mm. for different types of contacts fitting
  • scanner, bar code reader
  • cable for connection to a PC via RS-232
  • adapter cable – to connect the adapter to the USB connector on the PC disk to install it

The manufacturer provides a warranty of 12 months from the date of sale

Electrofusion welding machine can be operated and maintained only by trained and qualified personnel who have knowledge of welding techniques polyethylene and polypropylene pipes!!!